8 800 222-34-56

Беркут-Сервис

Boats

Boats (18)

Active Hard Top (EN)

New design, new technology.


The main feature of new Active series is the buoyancy blocks in the form of hermetic hollow compartments organically fitting in the body: no foam or polyurethane foam.

Characteristics


6.9 m

2.45 m

4/3 mm

18°

1100 kg

7 persons

115-225 HP

180 l

 

 

Features

 


Our designers have applied the principle allowing to provide boat boards with hermetic hollow compartments with rib stiffeners and splash boards, which additionally give the boat brutal, “faceted” appearance.

These bodies are mainly “faceted” above the chine; bottom, including the fore body is quite classic.

The motor boat stands out with an increased security and stability on the water, while loading capacity is 1500 kg. During trials and tests, the motor boat speed up to 70 km/h with a 150 hp motor and two passengers on board.

 

 

Configuration

 


 The motor boat Berkut Active-HT is made in Standard version. 

Configuration Standart from 1 250 000 ₽

1) MOTOR BOAT HULL:2) BODY PAINTING:
1.1. All-welded body from AMG-5M 2.1. Polyurethane paint.
1.2. Rail guard kit. 2.2. There are 2 colors to choose from according to the color chart on the website.
1.3. Additional transom under the engine (9.9 hp). 3) FELLING GLAZING:
1.4. Welded glasses on the body (12 pcs). 3.1. Tempered glass 6 mm (5 pcs)
1.5. Radar Arch (1 pc). 3.2. Sliding windows of the captain and passenger.
1.6. Self-draining cockpit 3.3. Bow hatch 1 pc.
1.7. Aerator tank in the stern. (? liters) 4) INTERIOR:
1.8. Vinyl sticker on the sides. 4.1. Carpets Sintec (USA)
1.9. Non-slip coating for trampling. 4.2. Deck coating Marideck (USA)
1.10. 180 l fuel tank with fuel gauge. 4.3. The inner color of the housing Zolotone (USA)
1.11. Knecht plastic 200 mm. (6 pcs). 4.4. Soft linings in the cabin of Silver Tex (USA)
1.12. Anode pad (2 pcs). 4.5. Stern curtain with mosquito net (Sunbrella)
1.13. The platform under the sounder sensor (2pcs). 4.6. Removable sun protective visor.
1.14. Stainless steel folding ladder 3 steps 4.7. Captain and passenger seat with lateral support.
1.15. Transom to choose from (L-510 / XL -630 mm) 4.8. Passenger seats in the wheelhouse - 3 pcs.
  4.9. Seats for passengers to the stern of the cockpit - 2 pcs.
  4.10. Locker in the bow of the berth - 1 pc.
5) STEERING SYSTEM: 
5.1. Relay gearbox, steering cable. (designed for a motor up to 150 hp, with a larger motor power a hydraulic control system is needed)  
5.2. Logo steering wheel  
6) ELECTRIC EQUIPMENT: 
6.1. Running lights red / green diode - 1 pc.  
6.2. Stern fire diode - 1 pc.  
6.3. Top Fire - 1 pcs.  
6.4. Lamp in the salon - 1 pc.  
6.5. Sound signal - 1 pc.  
6.6. Captain's secreter - 1 pcs.  
6.7. 3000 GPH Electric Bilge Pump - 1 pcs.  
6.8. Chrome drain pump fitting - 2 pcs.  
6.9. Electrical Preparation - Fuses, Wiring, Battery Terminals, Battery Mounting Pad, 2 Battery Key Switch  
6.10. Button block 6 keys with backlight

 

 

Video & Photos

 


Hull painting options

 


BERKUT L-DC(EN)

 Multipurpose boat


BERKUT L-TwinConsole (novelty of 2015) is a multipurpose boat. First of all, it is designed for any type of fishing. Overwater and underwater fishing, spinning, trolling, bobber, whatever. Second, you can have fun with family and friends on the boat, enjoying large expanses of water. And if you equip a boat additionally, you can quickly transform it for adventure holiday, get on a water ski, do wakeboarding or take a ride on inflatable water sledge.

Characteristics


5.65 m

2.05 m

3/4 mm

18°

430 kg

6 persons

115 HP

100 l

The motor boat Berkut L-TwinConsole is made of aluminium alloy. The rigidity of the hull is provided by a longitudinal-transverse set. The thickness of the broadside is 3 mm, the bottom - 4 mm. Maximum allowable engine power is 115 HP, but 50 HP engine is enough to get the boat in planing mode with six persons. Interspace is filled with polyurethane buoyancy blocks of total volume about 600 litres. It provides positive buoyancy, sound insulation and durability, i.e., when the boat is filled with overboard water, it will remain afloat and will not sink. The sheer line is reinforced with a rubber boat fender. While standing, the boat is very stable and does not raise doubts even with impressive waves overboard. The boat easily goes on waves (sails in planing mode), turns very good, it does not sway and keeps the course well. It softly and without kicks deals with wave ridges even at full speed.

 

Features

 


Non-distortion windshields and durable door provide excellent splash protection for passengers in the aft part of the boat.

The motor boat Berkut L-TwinConsole, according to its classification, belongs to the Dual console type, what basically means two consoles and full large cockpit (two chairs and aft sofa). In the forepart area, there is a half-deck seat attached to forepeak. Passenger capacity of the boat — 6 persons. 

Due to the outboard motor (stern together with transom are moved backward), noise and vibration of engine are minimal, cockpit is very large, which means that more supplies and purveyance can be taken.

 

Configurations

 


 The motor boat Berkut L-TwinConsole is made in two versions: Standard and Comfort. When choosing a motor boat, carefully study what is included in one or another configuration. 

Configurations Standart Comfort
Цена 480 000 roubles 575l000lroubles
Hull (without an anchor chamber) Welded, foamed Welded, foamed
Plywood floorboards Laminated plywood with rubber edging Laminated plywood with Marideck coating
Hull powder paint RAL 9007 Paint colour by choice
Glazing tempered glass tempered glass
Electrical equipment Fuses, wiring, mass switch, battery clamps, battery attachment area Fuses, wiring, mass switch, battery clamps, battery attachment area
Bow railing Low Low
Echo-sounder sensor mounting area Yes Yes
Steering kit Plastic helm, gearbox, steering rope LUX helm, gearbox, steering rope
Stationary welded tank of 100 litres aluminium of 100 litres with fuel level sensor, made in USA aluminium of 100 litres with fuel level sensor, made in USA
Bilge pump Electric, 1500 gallons/hour Electric, 1500 gallons/hour
Large glove box Two in the after body Two in the after body
Small glove box Left to the passenger Left to the passenger
Additional transom Yes Yes
Welded ladder “Berkut” Yes Yes
Area for an anchor roller Optional Optional
Cockpit guard railing Yes Yes
Fishing bait holder Welded one on the door between consoles Welded one on the door between consoles
Handle in the passenger console Plastic Leather
Cigarette lighter socket In the button block portable
Tank filler neck Plastic Stainless
Hinges for covers and doors Plastic Stainless
Button block 3 keys with a cigarette lighter 4 keys with backlit
Cup holders 2 plastic ones in a step 2 stainless ones in a step
Captain’s chair The captain’s swivel chair on the brand rack The captain’s swivel chair on sleds and removable stand
Passenger’s seat The captain’s chair on the brand rack The captain’s swivel one on the removable stand
Running lights Combined running lights, stern and fore light Diode red, Diode green, fore, white stern light
Equipment of a stern part of cockpit optional For choice: locker transformer /2 welded lockers + table/stern seat with a lining
Trench gates (if equipped with a stern seat) plastic stainless
Glove box in the passenger console Open With plastic cover
Marideck on floorboards optional Yes
Soft overlays on gunwales optional Yes
Tray table optional Yes, if configuration includes stern steps or lockers
Sound signal optional Yes
Plastic cap of bilge pump Yes Yes
Crinolines behind transom Yes Yes
An insert for ski tow pylon Yes Yes

Video and photo

 


 

 

Hull painting options

 


BERKUT L-Hard Top Pro (EN)

 Modern and fast-moving design


Berkut L-HT Pro - this boat has a combined functionality, it is suitable for a long voyage on the sea or river, enjoying the magnificent nature and outlandish places, while you can still go fishing and hunting

Characteristics


5.65 m

2.07 m

3/4 mm

18°

465 kg

6 persons

115 HP

100 l

The motor boat Berkut L-HT Pro is made of aluminium alloy. The rigidity of the hull is provided by a longitudinal-transverse set. The thickness of the broadside is 3 mm, the bottom - 4 mm. Maximum allowable engine power is 115 HP, but 50 HP engine is enough to get the boat in planing mode. Interspace is filled with polyurethane buoyancy blocks of total volume about 600 litres. It provides positive buoyancy, sound insulation and durability, i.e., when the boat is filled with overboard water, it will remain afloat and will not sink. The sheer line is reinforced with a rubber boat fender. Also, it was decided to provide the boat with greater load capacity. For this purpose, the area and capacity for the cockpit was allocated, a bottom with a high level of rigidity of floorboards was made.

 

Features

 


An aluminium half-cabin forms habitable space protected from wind and rain. Together with a boat cover you can stay for multi-day trips without a tent. 

The captain's chair in the cockpit provides a good view over the cabin. There is a small windshield on the roof of the cabin

Due to the outboard motor (stern together with transom are moved backward), noise and vibrations of engine are minimal. But crinolines provide an easy access to the motor.

 

 

Configurations

 


 The motor boat Berkut L-HT Pro is made in two versions: Standard and Comfort. When choosing a motor boat, carefully study what is included in one or another configuration

Configurations Standart Comfort
Prise 575 000 roubles 650l000lroubles
Hull Welded, foamed Welded, foamed
Door in the bow part Yes Yes
Door closers and furniture Yes Yes
Glazing the cabin tempered glass tempered glass
Plywood floorboards in the cockpit Laminated plywood with rubber edging Laminated plywood with Marideck coating
Hull powder paint RAL 9007 Paint colour by choice
Electrical equipment Fuses, wiring, mass switch Fuses, wiring
Accumulator box with the mass switch Optional Yes
Bow railing Low Low
Echo-sounder sensor mounting area Yes Yes
Steering kit Plastic helm, gearbox, steering rope LUX helm, gearbox, steering rope
Welded tank Aluminium, 100 litres with fuel level sensor, made in USA Aluminium, 100 litres with fuel level sensor, made in USA
Bilge pump Electric, 1500 gallons/hour Electric, 1500 gallons/hour
Large glove box Two in the after body Two in the after body
Small glove box 2 in the cabin 2 in the cabin
Inspection hatch cover in the captain's console Yes Yes
Glove box in the passenger's console Yes Yes
Glove box in the passenger's console without a cover Yes Yes
Additional transom Yes Yes
Aluminium welded ladder Yes Yes
Area for an anchor roller Optional Optional
Stern railing Yes Yes
Lamp in the cabin Yes Yes
Locker in the cabin 5 lockers 5 lockers
Cabin’s interior finish Carpet Carpet
Floorboard finish in the cabin Optional Carpet
Tank filler neck with a breather in the recess Plastic Stainless
Button block 3 keys with a cigarette lighter 4 keys with backlit
Stowage with a cup holder for the captain Yes Yes
Captain’s chair The captain’s swivel chair on the brand rack The captain’s swivel chair with sleds on the brand rack
Passenger’s seat The captain’s chair on the brand rack The captain’s swivel chair on the brand rack
Running lights Red, green, fore light, white stern Diode red, Diode green, fore, white stern light.
Hinges plastic stainless
Cigarette lighter socket In the button block portable
Trench gate in the cabin Plastic Stainless
Trench gates in the cockpit (if equipped with a stern seat) plastic stainless
Equipment of a stern part of cockpit Optional For choice: locker transformer /2 welded lockers + table/stern seat with a lining
Marideck on floorboards in the cockpit Optional Yes
Soft overlays on gunwales in the cockpit Optional Yes
Soft overlays on gunwales in the cabin Optional Optional
Stern tray table Optional Yes, if configuration includes stern steps or lockers
Sound signal Optional Yes
A set of soft linings in the cabin Optional Yes
Plastic cap of bilge pump Yes yes
An insert for ski tow pylon Yes Yes

Video and photo

 


 

 

Hull painting options

 


BERKUT L-Jacket(EN)

 Solid and reliable


Fishermen, especially professionals, have been appreciating this model for a long time, and we can understand the reason. They are constantly on the water; they have to work both in calm and windy conditions. A solid and reliable motor boat L-Jacket does not allow them to doubt its merits.

Characteristics


5.65 m

2.05 m

3/4 mm

18°

430 kg

6 persons

115 HP

100 l

The motor boat Berkut L-Jacket is made of aluminium alloy. The rigidity of the hull is provided by a longitudinal-transverse set. The thickness of the broadside is 3 mm, the bottom - 4 mm. Maximum allowable engine power is 115 HP, but 50 HP engine is enough to get the boat in planing mode. Interspace is filled with polyurethane buoyancy blocks of total volume about 600 liters. It provides positive buoyancy, sound insulation and durability, i.e., when the boat is filled with overboard water, it will remain afloat and will not sink. The sheer line is reinforced with a rubber boat fender.

 

Features

 


The motor boat Berkut L-Jacket is a boat with hood (automotive) layout of the cockpit — a foredeck area, under which the spacious luggage compartment is located. 

Spacious cockpit protected by windshield glass in lightweight aluminium frame with a small window in the central part.

Consoles are made of plastic. For easy access to the foredeck, there are three steps installed in the front panel.

 

 

Configurations

 


The motor boat Berkut L-Jacket is made in two versions: Standard and Comfort. When choosing a motor boat, carefully study what is included in one or another configuration.

Configurations Standart Comfort
Prise 475 000 roubles 550l000lroubles
Hull Welded, foamed Welded, foamed
Plywood floorboards Laminated plywood with rubber edging Laminated plywood with Marideck coating
Hull powder paint RAL 9007 Paint colour by choice
Glazing polycarbonate polycarbonate
Electrical equipment Fuses, wiring, mass switch, battery clamps, battery attachment area Fuses, wiring, mass switch, battery clamps, battery attachment area
Front desk Plastic Plastic
Bow railing Low Low
Locker of foredeck With plastic cover With plastic cover
Echo-sounder sensor mounting area Yes Yes
Steering kit Plastic helm, gearbox, steering rope LUX helm, gearbox, steering rope
Stationary welded tank of 100 litres aluminium of 100 litres with fuel level sensor, made in USA aluminium of 100 litres with fuel level sensor, made in USA
Bilge pump Electric, 1500 gallons/hour Electric, 1500 gallons/hour
Large glove box Two in the after body Two in the after body
Small glove box Left to the passenger Left to the passenger
Additional transom Yes Yes
Welded ladder “Berkut” Yes Yes
Area for an anchor roller Optional Optional
Stern railing Yes Yes
Cigarette lighter socket In the button block portable
Tank filler neck Plastic Stainless
Hinges for covers and doors Plastic Stainless
Button block 3 keys with a cigarette lighter 4 keys with backlit
Cup holders 2 plastic ones in the console 2 stainless ones in the console
Captain’s chair The captain’s swivel chair on the brand rack The captain’s swivel chair on sleds and removable stand
Passenger’s seat The captain’s chair on the brand rack The captain’s swivel one on the removable stand
Running lights Combined running lights, stern and fore light Diode red, Diode green, fore, white stern light.
Equipment of a stern part of cockpit optional For choice: locker transformer /2 welded lockers + table/stern seat with a lining
Glove box in the passenger console With plastic cover With plastic cover
Marideck on floorboards optional Yes
Tray table optional Yes, if configuration includes stern steps or lockers
Sound signal optional Yes
Plastic cap of bilge pump Yes Yes
An insert for ski tow pylon Yes Yes

Video & Photos

 


 

 

Hull painting options

 


BERKUT L-Aluma(EN)

 Modern and fast-moving design


The intended purpose of Berkut L-Jacket Aluma is outdoor activities. This configuration is more suitable for water sports and recreation. The design of the boat contributes to it. However, do not forget about fishing. The very modern and fast-moving design of the boat is unlikely to leave anyone indifferent.

Characteristics


5.65 m

2.05 m

3/4 mm

18°

430 kg

6 persons

115 HP

100 l

The motor boat Berkut L-Jacket Aluma is made of aluminium alloy. The rigidity of the hull is provided by a longitudinal-transverse set. The thickness of the broadside is 3 mm, the bottom - 4 mm. The transom as it is moved backward it facilitates getting in planning mode already with a minimum engine of 70 HP. Permissible maximum power of the outboard motor is 115 HP. Deadrise on the transom of 18 degrees allows gently overcoming the waves, thought out chines significantly reduce splashes. With a wave of up to 0.5 meters, the cockpit remains almost dry.

 

Features

 


The windshield has an openable middle section for a comfortable exit on a bow. For this purpose, there are three steps built in front. 

Luggage compartment is placed under foredeck and is made of corrugated plate. On the deck hatch, there is a cut-in deck base to where you can quickly move chair. There are two low railings on the sides.

Due to the outboard motor (stern together with transom are moved backward), noise and vibration of engine are minimal, cockpit is very large, which means that more supplies and purveyance can be taken.

 

 

Комплектации

 


 Катер Беркут L-Jacket изготавливается в комплектациях Comfort  и Standart

Configuration Standart Comfort
Prise 475 000 roubles 550l000lroubles
Hull (without an anchor chamber) Welded, foamed Welded, foamed
Plywood floorboards Laminated plywood with rubber edging Laminated plywood with Marideck coating
Hull powder paint RAL 9007 Paint colour by choice
Glazing tempered glass tempered glass
Electrical equipment Fuses, wiring, mass switch, battery clamps, battery attachment area Fuses, wiring, mass switch, battery clamps, battery attachment area
Bow railing Low Low
Echo-sounder sensor mounting area Yes Yes
Steering kit Plastic helm, gearbox, steering rope LUX helm, gearbox, steering rope
Stationary welded tank of 100 litres aluminium of 100 litres with fuel level sensor, made in USA aluminium of 100 litres with fuel level sensor, made in USA
Bilge pump Electric, 1500 gallons/hour Electric, 1500 gallons/hour
Large glove box Two in the after body Two in the after body
Small glove box Left to the passenger Left to the passenger
Additional transom Yes Yes
Welded ladder “Berkut” Yes Yes
Area for an anchor roller Optional Optional
Cockpit guard railing Yes Yes
Fishing bait holder Welded one on the door between consoles Welded one on the door between consoles
Handle in the passenger console Plastic Leather
Cigarette lighter socket In the button block portable
Tank filler neck Plastic Stainless
Hinges for covers and doors Plastic Stainless
Button block 3 keys with a cigarette lighter 4 keys with backlit
Cup holders 2 plastic ones in a step 2 stainless ones in a step
Captain’s chair The captain’s swivel chair on the brand rack The captain’s swivel chair on sleds and removable stand
Passenger’s seat The captain’s chair on the brand rack The captain’s swivel one on the removable stand
Running lights Combined running lights, stern and fore light Diode red, Diode green, fore, white stern light.
Equipment of a stern part of cockpit optional For choice: locker transformer /2 welded lockers + table/stern seat with a lining
Trench gates (if equipped with a stern seat) plastic stainless
Glove box in the passenger console Open With plastic cover
Marideck on floorboards optional Yes
Soft overlays on gunwales optional Yes
Tray table optional Yes, if configuration includes stern steps or lockers
Sound signal optional Yes
Plastic cap of bilge pump Yes Yes
Crinolines behind transom Yes Yes
An insert for ski tow pylon Yes Yes

Video and photo

 


 

 

 

Hull painting options

 


BERKUT L-Fisher(EN)

 Multifunctional fishing boat


Modification of the motor boat Berkut L-Jacket Fisher is a multifunctional working fishing boat with increased load capacity, which is up to 600 kg. In this model, everything is subject to fishing, even at the expense of comfort. So, if the narrowness of city streets and the stuffiness of the offices are already pretty boring to you, you can try the captain's cap on!

Characteristics


5.65 m

2.05 m

3/4 mm

18°

430 kg

6 persons

115 HP

100 l

The motor boat Berkut L-Jacket Fisher is made of aluminium alloy. The rigidity of the hull is provided by a longitudinal-transverse set. The thickness of the broadside is 3 mm, the bottom - 4 mm. The transom (as it is moved backward) facilitates getting in planning mode already with a minimum engine of 70 HP. Permissible, the maximum power of the outboard motor is 115 HP. Deadrise on the transom of 18 degrees allows gently overcoming the waves, thought out chines significantly reduce splashes. With a wave of up to 0.5 meters, the cockpit remains almost dry.

 

Features

 


The windshield has an openable middle section for a comfortable exit on the fore. The glazing itself (triplex) is placed in a narrow frame, which does not disturb to see surroundings. 

The motor boat Berkut L-Jacket Fisher has the main feature. This is a self-bailing fore cockpit with a cut-in deck base where you can quickly move chair, allowing to keep the cabin clean during fishing.

Due to the outboard motor (stern together with transom are moved backward), noise and vibration of engine are minimal, cockpit is very large, which means that more supplies and purveyance can be taken.

 

Configurations

 


 Катер Беркут L-Jacket изготавливается в комплектациях Comfort  и Standart

Configurations Standart Comfort
Prise 475 000 roubles 550l000lroubles
Hull (without an anchor chamber) Welded, foamed Welded, foamed
Plywood floorboards Laminated plywood with rubber edging Laminated plywood with Marideck coating
Hull powder paint RAL 9007 Paint colour by choice
Glazing tempered glass tempered glass
Electrical equipment Fuses, wiring, mass switch, battery clamps, battery attachment area Fuses, wiring, mass switch, battery clamps, battery attachment area
Bow railing Low Low
Echo-sounder sensor mounting area Yes Yes
Steering kit Plastic helm, gearbox, steering rope LUX helm, gearbox, steering rope
Stationary welded tank of 100 litres aluminium of 100 litres with fuel level sensor, made in USA aluminium of 100 litres with fuel level sensor, made in USA
Bilge pump Electric, 1500 gallons/hour Electric, 1500 gallons/hour
Large glove box Two in the after body Two in the after body
Small glove box Left to the passenger Left to the passenger
Additional transom Yes Yes
Welded ladder “Berkut” Yes Yes
Area for an anchor roller Optional Optional
Cockpit guard railing Yes Yes
Fishing bait holder Welded one on the door between consoles Welded one on the door between consoles
Handle in the passenger console Plastic Leather
Cigarette lighter socket In the button block portable
Tank filler neck Plastic Stainless
Hinges for covers and doors Plastic Stainless
Button block 3 keys with a cigarette lighter 4 keys with backlit
Cup holders 2 plastic ones in a step 2 stainless ones in a step
Captain’s chair The captain’s swivel chair on the brand rack The captain’s swivel chair on sleds and removable stand
Passenger’s seat The captain’s chair on the brand rack The captain’s swivel one on the removable stand
Running lights Combined running lights, stern and fore light Diode red, Diode green, fore, white stern light.
Equipment of a stern part of cockpit optional For choice: locker transformer /2 welded lockers + table/stern seat with a lining
Trench gates (if equipped with a stern seat) plastic stainless
Glove box in the passenger console Open With plastic cover
Marideck on floorboards optional Yes
Soft overlays on gunwales optional Yes
Tray table optional Yes, if configuration includes stern steps or lockers
Sound signal optional Yes
Spinning box in between the consoles aluminium welded Aluminium welded with two pneumatic shock absorbers
Plastic cap of bilge pump Yes Yes
Crinolines behind transom Yes Yes
An insert for ski tow pylon Yes Yes

Video & Photos

 


 

 

Hull painting options

 


BERKUT L-Arctica (EN)

 Designed for harsh conditions


The motor boat Berkut L-ARCTICA is a model of 2016. Good design, as well as the use of modern materials favourably distinguishes this model among similar-sized boats that you will find on the water. This model allows you safely going both on fishing and on a trip to the most beautiful and remote places of small and large rivers, reservoirs and lakes, as well as sea waters. You will never forget your first Berkut L-ARCTICA, and you will always say that it is No. 1.

Characteristics


5.5 m

2.07 m

3/4 mm

18°

460 kg

5 persons

115 HP

100 l

The motor boat Berkut L-ARCTICA is made of marine aluminium. The hull of the boat is fully welded, with the thickness of broadsides of 3 mm, the bottom - 4 mm. Interspace is filled with polyurethane buoyancy blocks of total volume about 500 l. It provides positive buoyancy, sound insulation and durability, i.e., when the boat is filled with overboard water, it will remain afloat and will not sink. The sheer line is reinforced with a rubber boat fender.

 

Features

 



The motor boat BERKUT L-ARCTICA has fully open cockpit divided by two consoles. 

In a forward compartment, there is one-and-a-half seat locker, which is connected to the forepeak, where the anchor chamber is placed.

The motor boat BERKUT L-ARCTICA easily goes on waves (sails in planing mode), turns very good, it does not sway and keeps the course well. It softly and without kicks deals with wave ridges even at full speed.

 

 

Configurations

 


 Катер Беркут L-Arctica изготавливается в комплектациях Comfort  и Standart

Configuration Standart Comfort
Price 475 000 roubles 550l000lroubles
Hull Welded, foamed Welded, foamed
Plywood floorboards Laminated plywood with rubber edging Laminated plywood with Marideck coating
Hull powder paint RAL 9007 Paint colour by choice
Glazing tempered glass tempered glass
Electrical equipment Fuses, wiring, mass switch, battery clamps, battery attachment area Fuses, wiring, mass switch, battery clamps, battery attachment area
Bow railing Low Low
Echo-sounder sensor mounting area Yes Yes
Steering kit Plastic helm, gearbox, steering rope LUX helm, gearbox, steering rope
Stationary welded tank of 100 litres aluminium of 100 litres with fuel level sensor, made in USA aluminium of 100 litres with fuel level sensor, made in USA
Bilge pump Electric, 1500 gallons/hour Electric, 1500 gallons/hour
Large glove box Two in the after body Two in the after body
Small glove box -2 pcs in the forepart Left to the passenger Left to the passenger
Additional transom Yes Yes
Welded ladder “Berkut” Yes Yes
Area for an anchor roller Optional Optional
Cockpit guard railing Yes Yes
Handle in the passenger console Plastic Leather
Cigarette lighter socket In the button block portable
Tank filler neck Plastic Stainless
Hinges for covers and doors Plastic Stainless
Button block 3 keys with a cigarette lighter 4 keys with backlit
Cup holders 2 plastic ones in a step 2 stainless ones in a step
Captain’s chair The captain’s swivel chair on the brand rack The captain’s swivel chair on sleds and removable stand
Passenger’s seat The captain’s chair on the brand rack The captain’s swivel one on the removable stand
Running lights Combined running lights, stern and fore light Diode red, Diode green, fore, white stern light.
Equipment of a stern part of cockpit optional For choice: locker transformer /2 welded lockers + table/stern seat with a lining
Trench gates (if equipped with a stern seat) plastic stainless
Glove box in the passenger console Open Open
Marideck on floorboards optional Yes
Soft overlays on gunwales optional Yes
Tray table optional Yes, if configuration includes stern steps or lockers
Sound signal optional Yes
Plastic cap of bilge pump Yes Yes
Crinolines behind transom Yes Yes
An insert for ski tow pylon Yes Yes
Inspection hatch with a cover in the captain's console Yes Yes
Stowage for small items with a cover in the steps of the forepart of cockpit Yes Yes

Video and photo

 


 

 

Hull painting options

 


BERKUT S-Jacket (EN)

One of the best in its range


Berkut S-Jacket is one of the most common models among fishermen (professionals and amateurs). It is made in the automobile (conventional) layout, being an excellent alternative for those who liked the old boat models, such as “Progress” and “Kazanka” (“Казанка”). The boat has high speed, stability and good maneuverability, providing passengers with safety and reliability.

Characteristics


4.7 m

1.65 m

3/2 mm

12°

230 kg

4 persons

50 HP

35 l

It is designed for use with outboard engines with a capacity of 15 to 50 HP. Two persons standing at the same side do not cause serious hull heeling; therefore, the movement of passengers along the boat hull can be easy. The boat is very affordable (in terms of price) has a full standard configuration in terms of steering, mooring and electrical equipment. The boat is made of aluminium with a bottom thickness of 3 mm and broadsides of 2 mm. All connections are welded using double-boiling technology.

 

Features

 


Impressive hood, with aluminium cover creates a raised deck (fluted aluminium, thickness 3 mm)
turning into the front panel of the command post. Under the deck, there is a roomy locker of 350 litres.

The aluminium motor boat Berkut S-Jacket is the boat with the automobile (conventional) layout of the cockpit. Length of the hull is 4.3 m, but overall length is 4.7 m. In the size range of the Berkuts the Jacket is with hood (closed bow of the boat). Glass material - acrylic. The windshield frame is supplied with easy opening small window, providing convenient access to the bow.

 

Configuration

 


 The motor boat Berkut S-Jacket is made in two versions: Standard and Comfort. When choosing a motor boat, carefully study what is included in one or another configuration

ConfigurationStandartComfort
Price235 000 roubles295l000lroubles
Hull Welded, foamed Welded, foamed
Floorboards Laminated plywood with rubber edging Laminated plywood with Marideck coating
Hull powder paint Optional Paint colour by choice
Glazing Brand anodized frame with acrylic glazing (silver) Brand anodized frame with acrylic glazing (black)
Bow railing Low Low
Echo-sounder sensor mounting area Yes Yes
Stationary welded tank of 35l optional optional
Large glove box Two in an after body Two in an after body
Stern railing Yes Yes
Trench gates (if equipped with a stern seat) plastic stainless
Equipment of a stern part of cockpit Welded aluminium stern seat with plastic cover Welded aluminium stern seat with plastic cover
Glove box in the passenger console Open Open
Rowlocks for oars Yes Yes
Stern crinolines Yes Yes
Hinges for covers and doors plastic stainless
Soft overlays on broadside boxes optional Yes

 

Video and photo

 


You can rotate the image using the left mouse button.

Berkut S

 

 

Hull painting options

 


 

Berkut XS (EN)

Simple, laconian, lightweight


The motor boat Berkut XS is the smallest one in the Berkut series. Simple, laconian, lightweight, it is ideal for both fishermen and hunters. If to say easier, it is “angular”, but good.

Characteristics


3.9 m

1.54 m

3/2 mm

110 kg

3 persons

15 HP

The weight of the aluminium boat Berkut XS with equipment and supplies (without motor) is 110 kg. So, using it with a motor up to 10 HP, it is not required to register it in the State Inspectorate for Small Vessels, and driving licence is not necessary. The stern seat and bow seat with lockers are included in the basic configuration, two large and two small glove boxes (in the stern and bow part) will help you remove fishing tackle and supplies so that they don’t mess up in the boat

 

 

Features

 


Berkut XS is lightweight (110 kg), which means that two persons can transport it to the water. It is very convenient for hunters and fishermen.

Berkut XS is open, more rowing boat rather than a motorboat. Although with a motor, it feels great on the water.

Berkut XS has a bottom thickness of 3 mm. Stern and high bow railings will help going on waves.

 

 

Комплектации

 


 

Configuration:

 

1.Hull

Welded, foamed

2. Floorboards

Laminated plywood with rubber edging

3. Hull powder paint

Ral 6020

4. Stern railing

Low

5. Echo-sounder sensor mounting area

No

 6. Cutout for the tiller

Yes

7. Bow railing

Yes

8. Transom handles

Yes

9. Equipment of a stern part of cockpit

 Welded aluminium stern seat with a hole for a portable tank

10. Bow seat

Welded aluminium bow seat with a lid

 11. Rowlocks for oars

 Yes

12. Welded recess

Yes

Additional options:

 

Hand pump

2000

A set of soft linings

7500

Transportation tent

7500

PVC bimini top

20000

Mini PVC bimini top

15000

Welded console

14000

A set of oars

3500

Main seat with a locker

6500

Video & Photos

 


Hull painting options

 


Nord Cruiser (EN)

Real hunting-craft


The model with a total length of 6.9 m and a width of 2.45 m. This motor boat has a high broadside and pronounced splash boards. Due to the high deadrise angle on the head, you can feel safe even if waves are serious.

Characteristics


6.9 m

2.45 m

4/4 mm

21°

1600 kg

8 persons

130 - 225 HP

240 l

 

 

 

Features

 


In front of the boat is a cabin with a large hatch. The motor boat has a traditional reverse slope characteristic
for the northern latitude, providing very good water washability, if the wave is hitting or there is heavy rain. 

The motor boat is equipped with an additional command post. This post is convenient for trolling fishing and mooring tasks.

The motor boat has panoramic windows, providing an excellent overview when reversing.
High broadsides and closed cabin chassis turns this boat into a sea hunter, which is not afraid of a light storm, wind and rain. 

 

 

 

Hull painting options

 


 

Подписаться на этот канал RSS

О нас

Наша компания Беркут-Марин на рынке работает с 2009 года. У нас вы можете приобрести только самые качественные катера,
приобрести их в Санкт-Петербурге. Купить лодку в спб, купить катер в спб просто и легко, все наши катера и лодки присутствуют
на сайте, в случае чего вы можете приехать к нам и приобрести их.  Наш завод соединяет в себе традиции лучших лодочных
производителей с новейшей технологической и материальной базой, а персонал обладает высокой квалификацией и необходимым опытом.
И, на сегодняшний день, катера можно приобретать по доступным ценам. В городе Санкт-Петербурге, у тех, кто интересуется
малогабаритным водным транспортом, есть прекрасная возможность купить алюминиевый катер или алюминиевые лодки по приемлемой цене.
Наша компания предоставляет возможность купить катер в СПБ.

Яндекс цитирования